Product Description
Reagent bottle blowing machine
Injection blow molding machine for 5ml~800ml bottles. The machine produces maximal 2, 800 PCS bottles per hour. Suitable for most thermoplastic resins such as PE, PP, PS and so on. Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
Main features
1. Use proportional variable pump, save 20% power consumption.
2. The clamping framework adopts single-crossbeam and two shores, which enlarges the space of mould, Will be much easier to install mould.
3. Optional tie-bar protection device makes clamping open and close while transfer table rise and drop, so the production efficiency has been improved obviously.
PRODUCT FEATURES:
1). Excellent mechanical strength, impact -resisting.
2). Non-cracking bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.
3). The weight of the product can be destined.
4). The measurement and thickness of the product can meet the requirement of the design without any deviation.
5). The surface of the bottle mouth and the body is good luster and smoothness.
6). No rough selvedge will occur at the mouth or bottom of the bottle products, which saves the cost of the raw material.
7). On the bottom of the bottle there is no joint seam, and the strength is improved.
8). The joint seam on the bottle body is smooth.
IB30-3S Main Technical Parameters
1. Dia. Of Screw: 40mm
2. Max. Theoretical capacity: 165 cm3
3. Electric heating power of cylinder: 6.5 k w
4. Electric heating control section: 4 qty
5. Clamping force 0f injection die: 300 KN
6. Clamping force 0f blow die: 55 KN
7. Opening distance of mould: 120mm
8. Idle time: 4 S
9. Max Mould size L *W: 400*250mm
10. Min. Mould thickness: 180 mm
11. Main motor power: 15 k w
12. Die-heating power 3.2 kw
13. Pressure of hydraulic system: 14Mpa
14. Working Pressure of comp air: 1.0 M Pa
15. Displacement of comp air: 0.3 m3/h
16. Cooling water needed capacity: 3 m3/h
16. Overall size L* W* H: 3400*1150*2300 mm
17. Machine weight: 4 T
18. Range of formability product: 15-800 ml
19. High of formability product: 165 mm
20. Diameter of formability bottle: 100mm
21. Total power: 24.5 k w
Cavity Number of One Mould and Size of bottle. (For Reference)
Diameter (mm) 25 30 40 50 60 70 75~85
Height (mm) 60 80 80 100 120 150 150
Central distance (mm) 35 40 50 60 75 85 100
Cavity quantity 8 7 6 5 4 3 2
COMPANY
Audited Supplier 
){kind=link}